Home Company Info Product Catolog Partners Contact Us
Foundation Split/Slab App

Product Categories

Concrete Additives
Cures/Surface Treatment
Grouting
Underlayments
Concrete Repair
Water Repellents
Waterproofing
Joint Sealants
Flooring
Wall Coatings

 

Waterproofing

Vehicular/Pedestrain
Foundation Split/Slab App
Cementitious Waterproof
Decorative Coatings
Containment Coatings

 

 

 

 

 

 

 

 

Foundation and Split/Slab Application

 

Product Image

HLM 5000
HLM 5000® is a one-component, moisture-curing, bitumen-modified polyurethane elastomeric waterproofing membrane for exterior below-grade or between-slab applications. It is available in 4 grades for application by trowel, squeegee, roller, and spray. HLM 5000® comes in a variety of grades for different applications: HLM 5000® SL (self-leveling) is formulated for application by squeegee to horizontal areas. HLM 5000® T (trowel) is formulated for application by trowel to vertical surfaces. HLM 5000® S (spray) is a specially formulated version of 5000T for spray application. HLM 5000® R (roller) is formulated for application by roller to vertical and some horizontal surfaces.
Learn more

Product Image

Hydrocide® 600, 700, 700B
Hydrocide® 600, 700 and 700B are cold-applied water-based emulsified-asphalt dampproofing and vapor-retarding coatings for use on "green" or slightly damp surfaces. Hydrocide® 600 is fiber-free for application by brush or spray. Hydrocide® 700 is reinforced with long fibers for application by trowel. Hydrocide® 700B is reinforced with short fibers for application by brush or spray.
Learn more
 

Product Image

Mastics
Mastics are cold-applied solvent-based dampproofing and vapor-retarding coatings for use on dry, cured surfaces. Mastic contains long fibers for trowel application. Semi-Mastic contains short fibers for brush or spray application. 128 Spray Mastic contains selected fibers for spray application (or trowel at low temperatures). 648 Mastic is fiber-free for application by brush or spray.
Learn more

 

Product Image

Sonoshield® DBS 2000, 6000, 6200, and 9000
DBS 2000, 6000, 6200, and 9000 constitute a series of polypropylene drain board systems that significantly reduce the amount of water coming into contact with the waterproofing membranes, relieve hydrostatic pressure, and extend the life of the waterproofing system. Sonoshield® DBS 2000 A cost-effective, high-strength polymeric core and non-woven geotextile filter fabric for vertical installations at shallower depths where moderate compressive strengths and flow capacity are adequate. Sonoshield® DBS 6000 and 6200 Offers the ultimate in vertical drain solutions. DBS 6200 incorporates a plastic sheet adhered to the back surface of the drain core, offering a protective layer that prevents die cutting of the waterproofing membrane. Sonoshield® DBS 9000 A high-strength drain board ideally suited for horizontal applications. DBS 9000 utilizes a high-strength woven monofilament filter fabric that offers ideal drainage and support under concrete, soil, and beddings.
Learn more

 

 

 

 

 

 

PDF Sheets
Click on "Learn more" to get the following info:

 

 - Material Safety Data    Sheets

 - Product Data Sheets

 

 - Guide Specifications

 

 - Full Catalog Search

 Back Home Up Next

 

Copyright © 2006 Ridgemoor Supply, Inc