Home Company Info Product Catolog Partners Contact Us
Surface Prep/Block Fillers

Product Categories

Concrete Additives
Cures/Surface Treatment
Grouting
Underlayments
Concrete Repair
Water Repellents
Waterproofing
Joint Sealants
Flooring
Wall Coatings

 

Wall Coatings

Foot Traffic
Paints/Stains/Transparent
Elastomeric Coatings
High Build Epoxy
High Build Coatings
Cold Weather Applications
Surface Prep/Block Fillers
Cementitious Coatings

 

 

 

NO IMAGE

AVAILABLE

Thoro® 20 Block Filler
Thoro® 20 Block Filler is a ready-to-use, solvent-based block filler used to prime and fill porous masonry and concrete surfaces before the application of Thoro® coatings.
Learn more

Product Image

Thoro® Block Filler
A one-component 100 % acrylic resin used to prime and fill porous masonry and concrete surfaces before the application of Thoro® coatings. It provides a uniform surface for the application of Thorocoat ® and Thorolastic®, as well as any other water-based coating. Thoro® Block Filler can be applied by roller, brush, or spray. It is VOC compliant.
Learn more

Product Image

Thoro® CM Primer
A 100% acrylic ready-mix tintable primer. Thoro® CM Primer is primarily designed for use on concrete block, brick, stucco, and cement plaster surfaces. It is used on above-grade vertical and overhead surfaces to provide easier application and better adhesion for various Thoro coatings.
Learn more

Product Image

Thoro® Primer 2K
Thoro® Primer 2K is a white-pigmented, acrylic coploymer primer for chalky surfaces. Use it prior to applying Thoro® coatings to enhance bond strengths of Thoro® high-build coatings to the substrate.
Learn more
 

Product Image

Thorobond®
Thorobond® is a water-based, surface-applied polyvinyl acetate bonding agent. Apply it by brush, roller, or spray to masonry, gypsum plaster, concrete, and wallboard before topping with plaster or concrete mortar.
Learn more
 

Product Image

Thorolastic® Brush Grade and Knife Grade
Thorolastic® Brush Grade is a water-based, acrylic elastomeric crack filler for repairing cracks up to 1/16" (1.6 mm) in width. Thorolastic® Knife Grade is a water-based, acrylic elastomeric crack filler for repairing cracks from 1/16 – 1/4" (1.6 – 6 mm) in width and filling voids over 1/16" (1.6 mm). Both are available in smooth finishes. Thorolastic® Knife Grade is also available in the textured finish.
Learn more

 

 

 

 

 

 

 

PDF Sheets
Click on "Learn more" to get the following info:

 

 - Material Safety Data    Sheets

 - Product Data Sheets

 

 - Guide Specifications

 

 - Full Catalog Search

 Back Home Up Next

 

Copyright © 2006 Ridgemoor Supply, Inc