Home Company Info Product Catolog Partners Contact Us
Cementitious Grouts

Product Categories

Concrete Additives
Cures/Surface Treatment
Grouting
Underlayments
Concrete Repair
Water Repellent
Waterproofing
Joint Sealants
Flooring
Wall Coatings

 

Grouting

Cementitious Grouts
Epoxy Grout
Specialty Grouting

 

 

 

 

 

 

General Anchoring

 

Product Image

Sonopost™
Sonopost™ is designed for a variety of grouting and anchoring applications where high initial strengths are useful, including the grouting of machinery and equipment bases and the anchoring of railings, bolts, and posts.

 

Product Image

Thorogrip®
Thorogrip® is a one-component, waterproof, nonshrinking, Portland-cement-based anchoring cement that sets hard in 15 minutes. It expands as it sets and locks into the surrounding concrete. It can reach over 23,000 pounds pull- out strength at 7 days.

 

Precision Grouting

 

Product Image

Embeco® 636 Plus Grout
Embeco® 636 Plus Grout contains metallic and quartz aggregates and can be used at any consistency from fluid to damp pack. Use it for applications requiring precision support where early form stripping or shoulder trimming are required. Embeco® 636 Plus Grout meets the compressive strength and nonshrink requirements of CRD C 621, Corps of Engineers Specification for Nonshrink Grout, and ASTM C 1107, Grade B.
 

Product Image

Embeco® 885
Embeco® 885 is a cement-based metallic-aggregate grout with an extended working time. It is ideally suited for grouting machines or plates requiring optimum toughness and precision load-bearing support, including machine bases subject to thermal movement. Embeco® 885 grout meets the requirements of ASTM C 1107 and the U.S. Army Corp of Engineers CRD C 621, Grades B and C.
 

Product Image Masterflow® 713 Plus
Masterflow® 713 Plus is a cement-based grout with specially graded mineral aggregates. It can be used at any consistency from fluid to damp pack for applications that require precision support and early form stripping or shoulder trimming. Where early form removal is not required but extended working time is needed, use Masterflow® 928. Masterflow® 713 Plus meets all of the requirements of CRD-C 621, Grades B and C, Corps of Engineers Specification for Nonshrink Grout and ASTM C 1107, Grades B and C.
 

Product Image Masterflow® 928
Masterflow® 928 grout is a hydraulic cement-based mineral-aggregate grout with an extended working time. It is ideally suited for grouting machines or plates requiring precision load-bearing support. It can be placed from fluid to damp pack over a temperature range of 45 to 90° F (7 to 32° C). Masterflow® 928 grout meets the requirements of ASTM C 1107, Grades B and C, and the Army Corp of Engineers’ CRD C 621, Grades B and C, at a fluid consistency over a 30-minute working time.
 
Utility / Construction
Product Image Set Grout
Set® Grout is a Portland-cement-based construction grout containing mineral aggregate. It is designed to meet all of the performance requirements of the Corps of Engineers Specification CRD C 621 and ASTM C 1107, Grades B and C, at a consistency from flowable to damp pack.

 

Product Image Sonogrout® 10K
Sonogrout® 10K is Portland-cement-based, shrinkage-compensated high-strength grout that conforms to Corps of Engineers CRD-C-621-83 and ASTM C 1107. Its nonmetallic formula does not rust, bleed, or harm metals on contact. Its cost-effectiveness makes it ideal for large jobs.

 

 

 

 

 

 

 

PDF Sheets
Click here on Learn more to get the following info:

 

 - Material Safety Data    Sheets

 - Product Data Sheets

 

 - Guide Specifications

 

 - Full Catalog Search

 Home Up Next

 

Copyright © 2006 Ridgemoor Supply, Inc