Home Company Info Product Catolog Partners Contact Us
Traffic Repair

Product Categories

Concrete Additives
Cures/Surface Treatment
Grouting
Underlayments
Concrete Repair
Water Repellents
Waterproofing
Joint Sealants
Flooring
Wall Coatings

 

Concrete Repair

Water Intrusion
Crack Repair/Bonding
Rebar/Corrosion Protection
Surface Repair
Traffic Repair
Structural Repair

 

 

 

 

 

 

Product Image

10-60 Rapid Mortar
10-60 Rapid Mortar is a one-component shrinkage-compensated very rapid-setting cement-based mortar. It is designed for horizontal concrete surfaces where high early strength gain is required.

 

Product Image

10-60C Rapid Cement
10-60C Rapid Cement is a proprietary blend of cements and chemical additives. This concentrate is mixed with aggregate on site and used for large-scale horizontal concrete repairs that require high early-strength gain.


 

Product Image

10-61 Rapid Mortar
10-61 Rapid Mortar is a one-component shrinkage-compensated cement-based mortar with an extended working time. It is designed for repairing horizontal concrete surfaces.

 

Product Image

10-61C Rapid cement
10-61C Rapid Cement is a proprietary blend of cements and chemical additives. This concentrate is mixed with aggregate on site and used for large-scale horizontal concrete repairs that require an extended working time.


 

Product Image

Emaco® 2041
Emaco® 2041 is a one-component moisture-tolerant acrylic bonding agent. It is applied to concrete or steel before the placement of Emaco® 2020 polymer concrete system.

 

Product Image

Emaco® T415
Emaco® T415 repair mortar is one-component high-performance cementitious product. It produces high early strengths at a wide range of temperatures and can be placed into service for standard rubber-tire traffic in as little as 2 hours (depending on temperature). Emaco® T415 meets the ASTM C 928 specification for rapid repair of concrete.

 

Product Image

Emaco® T430
Emaco® T430 repair mortar is a one-component high-performance cementitious product. It produces high early strengths at a wide range of temperatures and can be placed into service for standard rubber-tire traffic in as little as 6 hours. Emaco® T430 is specially suited for hot-weather applications when an extended working time is required.
 

Product Image

Road Patch
Road Patch is a very rapid-hardening Portland cement-based, horizontal repair mortar for load-bearing substrates. It develops a tenacious bond, and its resistance to freeze/thaw cycles makes it suitable for cold climates. Reopen to traffic after just 1 hour.

 

Product Image

Roadpatch DOT
Roadpatch DOT is a fast-setting, fiber-reinforced, Portland-cement-based repair material for horizontal concrete where a quick return to traffic is required. Its high early strength allows opening the repaired area to vehicular traffic in 2 hours.


 

Product Image

Set® 45 and Set® 45 HW
Set® 45 is a one-component magnesium phosphate-based patching and repair mortar. This concrete repair and anchoring material sets in approximately 15 minutes and takes rubber-tire traffic in 45 minutes. It comes in two formulations: Set® 45 Regular for ambient temperatures below 85° F (29° C) and Set® 45 Hot Weather for ambient temperatures ranging from 85 to 100° F (29 to 38° C).

 

Product Image

Thoropatch®
Thoropatch® is a two-component, polymer-modified, Portland-cement-based repair mortar. Applied to horizontal surfaces, it gains strength quickly and has excellent chemical and wear resistance.

 

 

 

 

 

 

 

PDF Sheets
Click here on Learn more to get the following info:

 

 - Material Safety Data    Sheets

 - Product Data Sheets

 

 - Guide Specifications

 

 - Full Catalog Search

 Back Home Up Next

 

Copyright © 2006 Ridgemoor Supply, Inc